Essilor PRO-E 600 Скачать руководство пользователя страница 47

Страница: 47 / 112

The edging cycle starts.

When the edging cycle is finished, the retouch screen is displayed.

Press

to release the lens.

If necessary, retouch the lens.

Otherwise, start edging the second lens. Select the lens directly on the screen, on the left or right of the

work area.

The edging screen for the second lens is displayed. All finishes chosen and the modifications made

are kept.

b. Customized groove legend screen

Automatic groove

Customized grooves

◦

Front surface tracking: the middle of the groove is positioned at a constant distance from

the front surface.

◦

Rear surface tracking: the middle of the groove is positioned at a constant distance from

the rear surface.

◦

Distributed groove: the middle of the groove is positioned in proportion to the thickness of

the lens, with respect to the front surface.

Pro-E 600 > v1 -02.17

SER

ANUAL

> II. E

DGING

LENS

Содержание PRO-E 600

















































































































Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды

Essilor PRO-E 600, Руководство пользователя

Результаты поиска

Содержание PRO-E 600

Отзывы:

Бренды по названию

Популярные бренды