Essilor Pro-E 600 edger Скачать руководство пользователя

Страница: 31 / 198

•

Press

to move it towards the rear surface of the lens.

The curve cannot be moved more than the minimum distance between the front and rear surfaces

observed on the bevel before the modification.

The position of the bevel as well as the distances between the crest of the bevel and the front and

rear surfaces of the lens are displayed in the zoom window at the position of the cursor.

Press the “cycle start” button (front face) or

Press

to go back to the customized bevel finish screen.

For the second lens, the customized bevel icon is pre-selected and the trajectory modification icon is

displayed.

f. Displacing the bevel curve

The displacement of the bevel curve makes it possible to move the bevel without modifying its curve.

Press

from the customized bevel finish screen.

You will access the trajectory modification screen.

Press

to select the displacement of the bevel curve.

Use the

and

buttons to displace the bevel curve:

•

Press

to displace it towards the front surface of the lens.

•

Press

to displace it towards the rear surface of the lens.

The position of the bevel as well as the distances between the crest of the bevel and the front and

rear surfaces of the lens are displayed in the zoom window at the position of the cursor.

Press the “cycle start” button (front face) or

The edging cycle starts.

When the edging cycle is finished, the retouch screen is displayed.

SER

ANUAL

> II. E

DGING

LENS

Pro-E 600_Pro-E 700 > v1 -10.18

Содержание Pro-E 600 edger







































































































































































































Результаты поиска

Содержание Pro-E 600 edger

Отзывы:

Похожие инструкции для Pro-E 600 edger

Бренды по названию

Популярные бренды

Essilor Pro-E 600 edger, Руководство пользователя

Результаты поиска

Содержание Pro-E 600 edger

Отзывы:

Похожие инструкции для Pro-E 600 edger

Бренды по названию

Популярные бренды