Essence Technology EAG Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 99

Essence Technology EAG Series Скачать руководство пользователя страница 39

1/5/2007

EAG Gateway Series Administration Guidelines

MAG-06007 Rev. A

Notify Instead of 401/402

In the Notify Instead of 401/402

8

select yes or no. If you select yes, the gateway will use off-hook

notification (NTFY

9

)message instead of 401 message and on-hook notification message instead of

402 message; if set to no, the gateway will still send out 401 and 402 messages.

Using Line Package Handle

In the Using Line Package Handle FXO field select yes or no. If you select yes, the gateway will treat

FXO using Line Package; if you select no, it will handle FXO using Handset Package.

5.6 SIP Configuration

After logging in, click the

SIP

10

Config

link on the left of the web configuration page, and you will see

the following:

Note:

For information on how to use Submit and Default, see 5.2.

Figure 18. SIP Configuration Interface

SIP Port

In the SIP Port field enter the number of SIP local port. The default value is 5060. Local port number

can be set to anything you like, as long as it doesn’t conflict with the other port numbers in the system.

SIP Proxy

In the SIP Proxy field enter the address and port number of the Proxy server. The address and port

number is separated by a colon. The address can be in either the IP address or the domain name.

When using domain name, you need to invoke DNS service in the Network Setting page and set the

8

401/402: Response Code.

9

NTFY: Notification, or Notify, a command sent from gateway to call agent.

10

Session Initiation Protocol (SIP) is the Internet Engineering Task Force's (IETF's) standard for multimedia

conferencing over IP. SIP is an ASCII-based, application-layer control protocol (defined in RFC 2543) that can
be used to establish, maintain, and terminate calls between two or more end points.

Like other VoIP protocols, SIP is designed to address the functions of signaling and session management within
a packet telephony network. Signaling allows call information to be carried across network boundaries. Session
management provides the ability to control the attributes of an end-to-end call.

35

«
...
37
38
39
40
41
...
»

Содержание EAG Series




































































































Отзывы:

Нет отзывов