manualshive.com logo in svg

Essence Technology EAG Series, Руководство администратора, Страница: 36 / 99

Поделиться
Скачать
Essence Technology EAG Series Скачать руководство пользователя страница 36

1/5/2007 

EAG Gateway Series Administration Guidelines   

MAG-06007 Rev. A 

 

                                                     

DNS Primary Server 

In the DNS Primary Server field enter EAG’s primary DNS server address if you have turned on DNS 

services. There is no factory default for this field. 

DNS Secondary Server 

In the DNS Secondary Server field enter alternate EAG’s DNS server address if you have turned on 

DNS services. There is no factory default for this field. 

PPPOE 

TIME 

Time Server 

In Primary TIME Server

6

 field enter the IP address of your primary Time server. There is no factory 

default for this field. 

Time Secondary Server 

In Secondary TIME Server field enter the IP address of your alternate Time server. There is no factory 

default for this field. 

Timeout 

In the Timeout field enter the time (in minute) allowed to locate the TIME server. If the server is not 

located within the time allowed, EAG will try to locate it again. There is no factory default for this field. 

Interval 

In the Interval field, enter the time interval (in minute) at which EAG will synchronize its time with the 

TIME server. There is no factory default for this field. 

 

5.5 MGCP Config 

After logging in, click the MGCP Config link on the left of the web configuration page, and you will see 

the following: 

Note:

 For information on how to use Submit and Default, see 5.2. 

 

6

 Time Server provides time calibration, control, and synchronization for equipments running in the network. 

32

 

Содержание EAG Series




































































































Отзывы:

Нет отзывов