1/5/2007
EAG Gateway Series Administration Guidelines
MAG-06007 Rev. A
Default Packages
In the Default Packages field enter all default packages. Use comma to separate each package. The
default setting is L, D, G, which means Line Package, DTMF Package, and Generic Media Package.
Persistent Line Event
In the Persistent Line Event field enter all types of persistent line event. Use comma to separate each
line event. The gateway will report to call agent when it handles an event. The default setting is L/HD,
L/HU, and L/HF. L/HD means off-hook; L/HU means on-hook; and L/HF means hook flash.
Wildcard
In the Wildcard field, select
yes
or
no
to indicate if EAG will add the fixed prefix when it registers with
the call agent (such as: aaln/*). For example, if you select
yes
here, and the FXS Line 1 is setup as
aaln/1, FXS Line 2 is setup ass aaln/2, FXS Line 3 as aaln/3, then the gateway will register as aaln/*
with the MGCP call agent and therefore do not need to register each line separately.
All Wildcard
In the All Wildcard field select
yes
or
no
to indicate if EAG will not add the fixed prefix when it registers
with the call agent (such as: *). The default value is no. If set to
yes
, the gateway will deal with all
wildcard.
End-of-Line Using CR
In the End-Of-Line Using CR field, select
yes
or
no
to indicate if EAG will use CR as line stop symbol
when sending messages. If set to
no
, CRLF will be used.
Quarantine Default to Loop
In the Quarantine Default to Loop field select yes or no to indicate how EAG will response it receives a
request. If set to
yes
, gateway will report continuously all events that are related to this request. If set
to
no
, gateway will report only once to each request.
Default Package Don’t Send Name
In the Default Package Don’t Send Name field, select
yes
or
no
. If set to
yes
, the gateway will respond
to the default package without a package name. If set to
no
, it will respond to the default package with
a package name.
Always Enable 1
st
Digit Timeout
In the Always Enable 1st Digit Timeout field, select
yes
or
no
to indicate how EAG will handle events
when there is no timeout indication from a request. If set to
yes
, the gateway will timeout according to
the value in system settings when the caller does not dial a phone number after going off-hook.
On-hook don’t Delete Connection
In the On-hook don’t Delete Connection field, select
yes
or
no
. If you select
yes
, the gateway will
disconnect automatically when the caller goes on-hook. If you select
no
, the gateway will wait for the
call agent to disconnect.
34