CE Domestic Slicer
ESSEDUE
OWNER'S AND MAINTENANCE MANUAL – Original Manual
10
3 RECEIVING THE MACHINE
Ensure all the operators have read and understood this manual before installation and operating. If
you are uncertain about a particular task or the proper method of operating this equipment, do not
proceed with installation and operating; ask your supervisor.
3.1 Remarks on delivery
The slicer is shipped from our warehouse properly packaged. On the box, in addition to
conventional symbols, the slicer model is printed. The package contains:
a) Cardboard box;
b) Slicer;
c) Owner’s and maintenance manual.
3.2 Packaging
Check that packaging has not been damaged and that the machine corresponds to the accompanying
document immediately after receipt; otherwise do not collect the goods. Open the packaging and
check that it contains all the item listed in section 3.1 “Remarks on delivery”.
Use at least two poeple to lift and move the slicer; install it on a suitable support (Page 11 and
following) and make sure that rubber feet are straight and firmly tightened.
If significant differences in the functioning of the machine may occurs, make a report of damages of
the machine within 3 days from delivery date indicated on the documents and submit it to the
carrier. Contact the Manufacturer within 10 days.
NEVER put packaging upside down.
NEVER use slicer without rubber feet installed
Use at least two people to lift the slicer. NEVER attempt to lift the slicer alone.
3.3 Disposal of the packaging
In case of movement of the slicer, please keep the box and all packaging material.
The packaging is made of cardboard and polystyrene and must be disposed in according to local
regulations.
Decommissioning and Disposal: Do not dispose in the environment. The symbol on the machine
indicates the prohibition of disposal with municipal solid waste according to Directive 2002/96 EC
WEEE.
Waste disposal should be performed in compliance with international and local regulations.
