Esse HI-PRO 1 Series, Руководство пользователя

Страница: 59 / 71

AUXILIARY SERVICES Page
59
When ignition conditions occur (opening or closing the contact) Hi-Pro will
perform the associated action sequence, or it will recall a profile. The
configuration of the digital input and of the actions following an alarm must be
made via the remote programmer software.
DEFAULT: upon closure of the contact the NIGHT profile is recalled.
Timer
Hi-Pro is provided with 4 programmable time events. When the set date and
time come, the action sequence is initiated.
Action sequences must be assigned to time events via remote programmer
software.
DEFAULT: no set timer.
Extension alarm events
Hi-Pro is provided with 2 alarm events that can originate from each extension:
alarm button (only with ST 350 telephones) and no dial.
When these events occur, an action sequence is initiated.
Action sequences must be assigned to alarm events via the remote programmer
software.
DEFAULT:
- alarm button: sequence 1 is initiated by pressing the alarm button on ST 350
telephones;
- no dial: if you pick up the receiver, but do not dial a number within the inter-
digit time (10 seconds), sequence 1 will be initiate.
Note: to enable the ST350 Alarm Key event upon an extension,
please see “Service activation” paragraph of the Installation
and Programming manual.
A
LARM DIALER
F
UNCTION
The Alarm Dialler function can be activated by an “event”. The event could be
a contact closure (Digital input), a timer programmed event, the pressure of the
ST350 alarm key or a “No selection” event from an extension enabled to this
service. The “event” starts a programmed “Action sequence” and activates an
“Internal Call” action or an “External Call” action.