Esse HI-PRO 1 Series, Руководство пользователя

Страница: 57 / 71

AUXILIARY SERVICES Page
57
Hi-Pro is provided with 2 actuator relays. With a traditional doorphone board,
relays 1 and 2 will automatically assume the door opener function. In any case,
they can be also used as actuators, by dialling the corresponding code.
Local activation
(relay number) (option) [ ... ]
(password) (confirm)
Pick up the handset and dial the code 37.
Dial the number of the desired relay (1~2).
Dial:
0 to turn the relay OFF (open contact)
1 to turn the relay ON (close contact)
2 to request an IMPULSE (relay on for a programmed amount of
time)
Dial the password if required by the relay configuration.
Wait for the message and the confirmation tone and hang up.
Note: turning the relay on/off, you will hear an error tone if the
operation cannot be performed.
Note: as a factory setting, the impulse lasts about 1 second.
However, this duration can be changed with the remote
programmer software.
WARNING
If a wrong password is entered 5 times, your access
to the control menu will be blocked for an hour.
Activating a relay for a desired amount of time
Allows specifying, for every request, the contact closure duration.
(relay numbers) (seconds) [
... ] (password) (confirm)
Pick up the handset and dial the code 37.
Dial the number of the desired relay (1~2).
Dial 3.
Dial the duration in seconds of the relay activation (001~999).