Esse Engineering BakeHeart, Руководство пользователя

Страница: 133 / 161

20
2. OPERATING INSTRUCTIONS
Internal flue
ways The flue ways inside the cook stove should be cleaned as
part of the annual service, and at the same time as the
flue and chimney are swept.
To do so, remove the hotplate by first inserting the end
of the Operating Tool into the hole at the side of the
steel disk. Then simply lever the hotplate up and clear of
the appliance.
Hotplate removal
REPLACING THE FIRE BRICKS
During the life of your cook stove, the vermiculite firebricks will need replacing.
The part numbers are shown in the ‘Consumable Parts’ section of this document.
The bottom and rear bricks can be replaced through the front opening, whilst
the side bricks and steel baffle require removal of the side panel.
Always wear gloves when undertaking any maintenance on your cook
stove.
To replace the bottom and rear firebricks…
1. Lever up the base brick from the rear, using a flat head screwdriver.
2. Lever forward the rear brick from the top, using a flat head screwdriver.
To replace the side firebricks and steel baffle…