Connector Assignments
7.8 Debug Interface X400 and JTAG FPGA Interface X1900
The Debug interface and the JTAG FPGA interface have to be connected from the bottom side of
the XMC-CPU/T10.
esd offers the XMC-CPU-ADAPTER-FPGA as accessory for both connectors, see Order
Information on page 40.
7.8.1 XMC-CPU-ADAPTER-FPGA
The XMC-CPU-ADAPTER-FPGA (esd order No.: V.2029.03) is an interface to connect the Tool
XILINX ChipScope to the XMC-CPU/T10 connector X1900.
Furthermore, the adapter can be used to connect X400 to a JTAG chain of the Health Controller
and PCIe-to-PCI bridge. The connector X400 is for factory test only.
Samtec CLM
<->
box header
(8 pins)
(10 pins)
to X1900 or
Figure 8:
XMC-CPU-ADAPTER-FPGA
NOTICE
The 8-pole SMD strip has no inverse-polarity protection! Property damage may result
due to incorrect adapter connection.
Ensure that the connector is plugged in in the right position. See figure 3 on page 12 for
the position of the X400 or X1900 connector pins.
XMC-CPU/T10
Hardware Manual • Doc. No.: V.2030.21 / Rev. 1.2
Page 35 of 41
