Escient Fireball E-2, Руководство пользователя

Страница: 337 / 369

VOLUME CONTROL FROM THE WEB INTERFACE WD045-1-1
5/18/2005
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
You must use specially formatted strings in order for the GC-100 to properly convert the string
to the corresponding IR signal, fortunately Global Cache provides a free utility program called
CCFCONVERT to convert Philips Pronto IR code strings into Global Cache IR code strings.
Visit the Global Cache web site to download this utility.
http://www.globalcache.com/files/ccfconvert.zip
Note: the CCFConvert program only works on a Windows PC and only accepts raw CCF
command strings which start with “0000”. The resulting string will start with “sendir”. Please
consult the Global Cache GC-100 manual for more details on the specifications.
http://www.globalcache.com/files/Documentation/API_GC-100.pdf
Example: Follow these steps to configure your FireBall to control the volume of a Sony TV
using IR codes from
www.remotecentral.com :
1. Connect your Global Cache to your Ethernet network.
2. Connect IR emitters from the Global Cache to your components.
3. Using your PC and a web browser, connect to your FireBall and go to the Volume
Control Configure screen as described above.
4. Enter the IP address of your Global Cache into the IP Address Field. The Global Cache
defaults to 192.1.1.70 .
5. Enter the Global Cache port number into the Port Field. The Global Cache defaults to
port 4998 .
6. Using the CCFCONVERT utility, convert the following Raw CCF codes into GC-100 IR
code strings. (Note: These raw CCF codes were obtained from a SonyTV CCF file on
www.remotecentral.com)
Command Raw CCF Code GC-100 IR Code String
Volume Up 0000 0067 0000 000d 0060
0018 0018 0018 0030 0018
0018 0018 0018 0018 0030
0018 0018 0018 0018 0018
0030 0018 0018 0018 0018
0018 0018 0018 0018 0422 sendir,<conn addr>:<module
addr>,<ID>,40000,<count>,1,96,2
4,24,24,48,24,24,24,24
,24,48,24,24,24,24,24,48,24,24,24
,24,24,24,24,24,1058
Volume Down 0000 0067 0000 000d 0060
0018 0030 0018 0030 0018
0018 0018 0018 0018 0030
0018 0018 0018 0018 0018
0030 0018 0018 0018 0018
0018 0018 0018 0018 040a sendir,<conn addr>:<module
addr>,<ID>,40000,<count>,1,96,2
4,48,24,48,24,24,24,24
,24,48,24,24,24,24,24,48,24,24,24
,24,24,24,24,24,1034
Mute 0000 0067 0000 000d 0060
0018 0018 0018 0018 0018
0030 0018 0018 0018 0030
0018 0018 0018 0018 0018
0030 0018 0018 0018 0018
0018 0018 0018 0018 0422 sendir,<conn addr>:<module
addr>,<ID>,40000,<count>,1,96,2
4,24,24,24,24,48,24,24
,24,48,24,24,24,24,24,48,24,24,24
,24,24,24,24,24,1058
7. Substitute the proper conn addr, module adr, ID, and count for your Global Cache.
Refer to the Global Cache API Specification for details. Example, to use IR port #1 on a
GC-100 use “sendir,2:1,1234,40000,3” where 40000 is the I carrier frequency.