Escient Fireball E-2, Руководство пользователя

Страница: 144 / 369

FIREBALL Advanced Users Guide WD041-1-1
10/26/2004
Page 38 of 70
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
To check for the codes of your other components, repeat steps 1 through 5, but substitute the
appropriate key (TV, CBL, RCV, DVD) for the component you are checking.
To exit Code Check Mode, press the CODE SET key once.
Re-Assigning Device Keys
The Remote can be set up to control a second TV, receiver or any combination of eight home
entertainment components. For example, to have the Remote control a TV, a Cable Converter,
and two DVD players, you can reassign an unused SOURCE key to operate the second DVD
player.
Follow these steps to re-assign the CBL key to control a second DVD player:
1. Press and hold CODE SET until the LED blinks twice, then release CODE SET.
2. Enter 9 - 9 - 2. The LED will blink twice.
3. Press the DVD key, then press the CBL key.
4. The CBL key is now ready to be programmed for a DVD player.
To reassign other device keys, repeat steps 1 through 4 by substituting the key sequence from
the below chart for the most popular components:
When a reassignment is done, the LED will blink twice to confirm your choice. At that time, you
will need to program the Remote to control the new component, following the instructions
above.
The following devices can be assigned to the TV, CBL, RCV, and DVD source mode buttons
on the Escient remote.
Source Button Device Assignment
TV TV
CBL
Cable, Video Accessories, Satellite, DSS
RCV Amplifier, Tuner, Phono, Misc. Audio, CD, Home Automation, MD
DVD VCR, Audio Cassette, DVD, LDP, DAT, PVR
Changing the Volume Lock
The remote is preset to control volume through your TV while in the TV, CBL, and DVD
modes. However, in an Audio mode (i.e. RCV, FB1, FB2, FB3, FB4), you have separate
control of your audio component’s volume.
Follow these steps to control the volume of the component instead of the TV.
1. Press and hold CODE SET until the LED blinks twice, then release CODE SET.
2. Enter 9 - 9 - 3 and then press any mode key once (except TV). The LED will blink twice.
3. Now, whenever you press VOL +, VOL –, or MUTE, the volume will be controlled by the
current mode.
Follow these steps to control the volume of the TV when in other modes (factory default).
1. Press and hold CODE SET until the LED blinks twice, then release CODE SET.
2. Enter 9 - 9 - 3 and then press TV. The LED will blink twice.