Escient Fireball E-2, Руководство пользователя

Страница: 142 / 369

FIREBALL Advanced Users Guide WD041-1-1
10/26/2004
Page 36 of 70
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Remote Control Programming
The FireBall remote is a “Universal Remote” which can control
up to eight different components including four FireBall
products. The FB1, FB2, FB3, and FB4 keys are used to
control FireBall products while the TV, CBL, RCV, and DVD
keys can be setup to control other devices.
Controlling One or More FireBalls
The FB1, FB2, FB3, and FB4 keys can be programmed to
control multiple FireBalls products including DVDM and E2-
300 products. This feature is also useful for controlling
multiple FireBalls located at the same physical location or on
the same IR distribution system.
There are two steps to controlling multiple FireBall products:
1. Setup the remote to transmit the corresponding code
bank
2. Setup the FireBall to receive or listen for a specific
code bank.
Setting up the remote to transmit one of the four code banks
is as easy as pressing the FB1, FB2, FB3, or FB4 keys.
Pressing one of these keys selects the one of the four FireBall
code banks. Next you need to tell each FireBall which bank
you want it to listen to. All FireBalls ship from the factory
assigned to listen for codes on the FB1 code bank.
Follow these steps to control a FireBall on the FB2 code bank.
1. Press the FB1 key on the remote to control a FireBall
on the default bank.
2. Press the SETUP key to display the Setup Menu.
3. Select the External Control Menu.
4. Select the IR & Serial Menu.
5. Select the IR Remote Control Menu.
6. Select the FB2 radio button to tell the FireBall to listen
to the FB2 code bank.
7. Select the SAVE button on the screen.
8. You will be instructed to press the FB2 key on the
remote, then select the OK button.
You have set the FireBall to listen to the FB2 code bank.
Repeat these steps to tell the FireBall to respond and listen to
any of the four code banks.