Escient Fireball E-2, Руководство пользователя

Страница: 120 / 369

FIREBALL Advanced Users Guide WD041-1-1
10/26/2004
Page 14 of 70
6325 Digital Way Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Powerline Networking
Powerline networking has existed in a few forms in the past, the lastest specification is called
HomePlug and runs at 14Mbps. HomePlug uses your existing home electrical wiring to transfer
data.
HomePlug does not interfere with existing electrical equipment or home automation devices
like X-10, CEBus, and LONworks. HomePlug also encrypts all data with 56bit DES encryption
to ensure that neighbors can not evesdrop on your network traffic.
Note: encryption is usualy not enabled by default and must be 'turned on' using software
proided by the devices manufacturer.
The HomePlug specification incorporates a technology called PowerPacket. This new
technology is what makes HomePlug different from the old powerline networks. PowerPacket
eliminates noise from electrical appliances like hair driers and televisions plus it offers
security. For more information on Powerline Networking, please visit the
HomePlug Official
Site
FireBall connects to a Powerline network using a Powerline to Ethernet Bridge. The Powerline
to Ethernet Bridge will “bridge” the gap between the FireBall’s Ethernet port and the home
Powerline network. When used with a broadband Internet connection, this networking
configuration effectively converts the FireBall’s wired Ethernet signals to travel over the home’s
Powerline network, then onto the Internet.
FireBall Connected to a Powerline Network