7
ElectraCam Instruction Manual
16. If you wish to use the landing gear, (not
recommended for beginners) then now is the
time to attach the tail wheel.
17. Attach 2 nuts to the retaining bolts and
tighten securely.
Tip: Place a small drop of thread locking
compound on the retaining bolts prior to
attaching the nuts, this will help prevent the
nuts from coming loose and falling off.
18
If you wish to use the landing gear, (not
recommended for beginners) then now is
the time to insert the main undercarriage
into the slot under the fuselage by squeezing
the undercarriage wire whilst pushing the
undercarriage wire fi rmly into the fuselage.
19. Test the undercarriage is installed at the
correct angle on a fl at surface. Squeeze
and move side to side to ensure the fuselage
points straight up.
20. Attach the wing using a minimum of 4 rubber
bands.
21. Place the rubber bands on the back of the
fuselage as shown.
22. Make sure wing is seated centrally on the
fuselage.
