9
ElectraCam Instruction Manual
27. After turning ON the transmitter as shown
above, open the canopy of the ElectraCam
and place the charged battery in the position
shown
.
Note: Double check your transmitter is ON.
28. Plug the white plug from the battery to the
white plug from the ESC in the ElectraCam
plane.
You should hear the servos come to life and
the LED on the FlyCamOne ECO will glow solid
GREEN.
Note: If the camera light does not glow solid
green, unplug the battery, wait a few
seconds and try again.
29. Secure the battery by closing the canopy
latch.
30. You are now ready to check the elevator and
rudder are set correctly and working in the
correct directions.
PREPARE FOR FLIGHT