5
ElectraCam Instruction Manual
CHARGING THE FLIGHT BATTERY
Mains power supply
NiMh Charger
NiMh Battery
The charger is designed to automatically charge the NiMh battery in just 20 to 30 minutes from a discharged state.
The automatic charger is powered by the mains power supply illustrated above.
Alternatively, you can use a 12V sealed modelling battery to power the DC automatic charger using the DC power leads
supplied.
1.
Connect the power supply to the charger.
The LED on the charger shows no light.
2.
Insert the white plug attached to the charger
into the white plug on the battery. Make sure
it is fully connected.
Charging:
Charge LED is solid
RED
.
Fully charged:
Charge LED is solid
GREEN
.
3.
When the battery is fully charged disconnect
the battery from the charger. Disconnect the
power supply from the charger.
Your NiMh battery is ready for use
4.
Alternatively you can connect the charger
to a 12V lead acid battery using the supplied
lead.
DC power leads
