ESCALADE GOALRILLA CV B3222W, Руководство пользователя

Страница: 8 / 19

Note: Tighten bolts snug but, do not over tighten. Board
Arms must pivot freely.
8.
9.
Attach Upper Arms (#6L & 6R) to pole (#2), as shown in F igure 7. Using a
bolt (#7), two flatwashers (#3), four plastic washers (#5) and hex nut (#4).
If the two Tube Plugs (#9) are not already installed insert them into open ends of
Upper Arms (#6L and 6R). It may be necessary to use a rubber mallet to tap plug in.
Figure 7
6R
6L
Drain Holes must be
on bottom Side
Drain Holes must be
on bottom Side
8