Raise Backboard to 10 FT. regulation playing height.
Measure from top of rim straight down to the playing
surface.
Using tape - mark the
side
of the steel actuator (#16)
just under the plastic actuator sleeve (#15) at this 10 ft
rim height. See
Figure 16
.
Lower backboard all the way down. Do not force
actuator once backboard is in it's lowest position.
See
Figure 17
.
Do not
remove adhesive backing from height decal
(#17) yet. Carefully place height decal on backside of
steel actuator (#16) and line up the 10 ft mark on the
tape with the 10 ft mark on the height decal. Decal
should fit correctly onto the backside of the steel
actuator. ( If not , simply trim to fit the top of the
actuator decal).
30.
31.
32.
33.
15
Tape
34.
Remove the adhesive backing from the Height Decal (#17).
Next, carefully align and stick decal to backside of steel
actuator (#16) starting at the
10 ft mark first
. Be sure to
keep the height decal straight and rub out all air bubbles. See
Figure 18
.
17
16
Figure 18
Lowered all
the way down
Tape at 10
feet
Figure 17
Set at 10 feet
Figure 16
Mark with
tape
15
15
Содержание GOALRILLA CV B3222W
Страница 2: ...2...
