Erreka RINO, Руководство по установке

Страница: 50 / 116

Se
guridad
_95.fm -
4/6/10
46
Installation Guide
GENERAL SAFETY INSTRUCTIONS
1 SYMBOLS USED IN THIS GUIDE
This guide uses symbols to highlight specific texts. The
functions of each symbol are explained below:

Failure to respect the safety warnings could
lead to accident or injury.
O
Instructions which must be followed to prevent
deterioration.

Work sequences or procedures.

Important details which must be respected for
correct assembly and operation.

Additional information to help the installer.
}
Information on care for the environment.
2 IMPORTANCE OF THIS GUIDE

Read this guide in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.

Moreover, this guide provides valuable information
which will help you to carry out installation more
efficiently.

This guide is an integral part of the product. Keep
for future reference.
3 ENVISAGED USE
This device has been designed for installation as part of
an automatic opening and closing system for sliding
doors and gates.

This device is not suitable for installation in
inflammable or explosive environments.

Failure to install or use as indicated in this
guide is inappropriate and hazardous, and
could lead to accidents or failures.

The installer shall be responsible for ensuring
the installation is set up for its envisaged use.
4
INSTALLERSQUALIFICATIONS'
 Installation should be completed by a professional installer, complying with the following
requirements:
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
(metal, wood, brick, etc) and the weight and
effort of the mechanism.
• He/she must be capable of carrying out
simple electrical installations in line with the
low voltage regulations and applicable
standards.

Installation should be carried out bearing in
mind standards EN 13241-1 and EN 12453.
5 AUTOMATIC KEY DEVICE SAFETY ELEMENTS
This device complies with all current safety regulations.
However, the complete system comprises, apart from
the operator referred to in these instructions, other
elements which should be acquired separately.

The safety of the complete installation depends on
all the elements installed. Install only Erreka
components in order to guarantee proper
operation.

Respect the instructions for all the elements
positioned in the installation.

We recommend installing safety elements.

For further details, see “Fig. 1 Elements of the
complete installation” on page 47.
RINO_EN.book Page 46 Thursday, June 10, 2010 5:21 PM