Programa
cio
n_95.fm -
22/3
/10
PROGRAMMING AND STARTUP
60
Installation Guide
3
RADIO CODE PROGRAMMING (FOR RSD-SH1 ONLY)
When using the ERREKA RSD-SH1 plug-in receiver (decoder-free receiver, trinary code, 433Mhz), the radio code
can be programmed in the control panel itself, as explained below. In other cases, follow the instructions of the
plug-in receiver used.
The programming of the radio in total and pedestrian opening are independent. Different transmitters can be
used with different codes.
Total opening code programming
Pedestrian opening code programming
1
Connect the control panel power supply (SW1 in
ON).
2
Close the leaf of the gate by pressing PUL1.
3
Place DIP1 and DIP4 in “ON”; DIP2, DIP3, DIP5 and
DIP6 in “OFF”.
DL3 lights up.
4
Select the required code in the transmitter.
5
Press the channel to be used for total opening.
If programming has been carried out correctly,
DL2 flashes.
6
Place DIP1 and DIP4 in “OFF” (DL2 and DL3 will go
off).
7
Disconnect and reconnect the panel power supply.
1
Connect the control panel power supply (SW1 in
ON).
2
Close the leaf of the gate by pressing PUL1.
3
Place DIP1 and DIP6 in “ON”; DIP2, DIP3, DIP4 and
DIP5 in “OFF”.
DL3 lights up.
4
Select the required code in the transmitter.
5
Press the channel to be used for pedestrian opening.
If programming has been carried out correctly,
DL2 flashes.
6
Place DIP1 and DIP6 in “OFF” (DL2 and DL3 will go
off).
7
Disconnect and reconnect the panel power supply.
RINO_EN.book Page 60 Thursday, June 10, 2010 5:21 PM
Содержание RINO
Страница 2: ...RINO book book Page 2 Friday June 11 2010 11 00 AM...
Страница 26: ...Actualizado 4 6 10 22 RINO_ES book Page 22 Friday June 11 2010 9 59 AM...
Страница 70: ...Updated 4 6 10 66 RINO_EN book Page 66 Thursday June 10 2010 5 21 PM...
Страница 115: ...RINO book book Page 17 Friday June 11 2010 11 00 AM...