E
N
G
L
IS
H
36
Display Reason
L
The display shows the letter
L
when the actuator is working normally and the red cam positioned on the chain activates
the micro switch on the motor
F
The display shows the letter
F
when the door encounters an obstacle
H
The display shows the letter
H
when the encoder or the control unit is malfunctioning
A
The display shows the letter
A
when the photocell intervenes
DISPLAY MESSAGES
m
CAUTION: When selecting decoding type (F: Fixed Code / r: Roller Code /r.: Personalised Roller Code) in order to control
automation, see paragraph “5. Selecting remote control decoding type”.
DELETING REMOTE CONTROL UNITS
MEMORISING REMOTE CONTROL UNITS
The device can memorise up to 15 remote control units. To memorise a remote control unit, proceed as follows:
Press the
key
F
,
r
or
r.
is then
displayed on screen after
around one second.
Release the
key and press the remote control button
twice: the device emits a BEEP and the display is turned
off to confirm memorising has been successful
Press and hold key
:
F
,
r
or
r.
is then
displayed on screen after
around one second.
Hold the key until the display is turned off : the remote
controls have been deleted.