D
E
U
T
S
C
H
57
4. Einstellen der Empfindlichkeit (Default: 4)
Dieses Menü ermöglicht es, die Empfindlichkeit der Vorrichtung zu erhöhen oder zu verringern, wenn das Tor auf ein Hindernis trifft.
Dieser Parameter ist bereits auf einen mittleren Wert (4) eingestellt, der für die meisten Installationen optimal sein müsste.
3. Lernen der Kräfte
Taste drücken
-
Display
zeigt
3
an
Taste
drücken:
3
blinkt -
Tor öffnet sich
Wenn das Tor stehen bleibt,
Taste
zum Bestätigen
drücken. Zur Fortsetzung
erneut Taste
drücken.
Tor schließt sich
Wenn das Tor stehen bleibt,
Taste
drücken, um die
Einstellungen zu speichern:
Display zeigt
3
an
Taste drücken
-
Display
zeigt
4
an
Taste
-
Display zeigt
blinkende
0
an
Empfindlichkeitsgrad wählen mit den Tasten
+
und
-
m
ACHTUNG: nachdem die Prozedur beendet ist, kann man das Programmieren verlassen, indem man die eingestellten
Parameter speichert: Taste
5 Sekunden gedrückt halten, bis sich die Displaysegmente einzeln nacheinander einschalten und
0
angezeigt wird.
m
ACHTUNG: wenn dieser Parameter verändert wird, ist es notwendig, nach beendeter
Programmierung einen vollständigen Öffnungs-/Schließzyklus durchzuführen, während dem
die Steuerung automatisch ein erneutes Lernen der Kräfte ausführt (während dieses Zyklus
arbeitet der Motor mit maximaler Kraft, folglich ist Vorsicht geboten).
Taste
drücken, um die
Einstellungen zu speichern:
Display zeigt
4
an
2. Einstellung des Endanschlags beim Schließen
Taste drücken
-
Display
zeigt
2
an
Taste
drücken:
2
blinkt
Taste
+
(das Tor öffnet sich)
oder Taste
-
(das Tor schließt
sich) gedrückt halten, um
die Position der maximalen
Schließposition zu erreichen
Wenn das Tor die
Schließposition erreicht, 2
Sekunden warten, dann
Taste
drücken, um die
Einstellungen zu speichern