F
R
A
N
Ç
A
IS
24
Afficheur
Cause
L
L'afficheur visualise la lettre
L
quand l'actionneur travaille en mode normal et la camme rouge positionnée sur la chaîne
active le micro-interrupteur sur le moteur
F
L'afficheur visualise la lettre
F
quand la porte rencontre un obstacle
H
L'afficheur visualise la lettre
H
en cas de mauvais fonctionnement de l'encodeur ou de l'armoire de commande
A
L'afficheur visualise la lettre
A
quand la photocellule s'actionne
SIGNALISATIONS AU MOYEN DE L'AFFICHEUR
m
ATTENTION: pour sélectionner le type de décodage (F : Code Fixe / r : Roller Code / r. : Roller Code Personnalisé) choisi pour
effectuer l’automatisation, consultez le paragraphe « 5. Sélection du type de décodage de la télécommande ».
EFFACEMENT DES TÉLÉCOMMANDES
MÉMORISATION DES TÉLÉCOMMANDES
Le dispositif est en mesure de mémoriser jusqu'à 15 télécommandes. Pour la mémorisation, veuillez procéder comme suit:
Presser la touche
Après environ une seconde,
F
,
r
ou
r.
s’allume sur
l’écran
Relâcher la touche
et presser 2 fois la touche de la
télécommande: le dispositif émet un BIP et l'écran s'éteint
Presser et maintenir
enfoncée la touche
Après environ une seconde,
F
,
r
ou
r.
s’allume sur
l’écran
Maintenir la touche enfoncée jusqu’à quand l'écran
s’éteint: les télécommandes ont été effacées