Erreka Dolfin DOS424E, Руководство по установке

Страница: 66 / 114

Pog
ramacion_
153.fm -
5/9/11
START UP AND PROGRAMMING
62
Installation Manual
Advanced Functions Programming (D1= “
A
”)
1
Press ENTER to access the programming menus. The
display lights up and D1 flashes.
2
Press the buttons ^ and
V
until D1 shows the letter
A flashing. Press ENTER to confirm. D2 flashes.
3
Press the buttons ^ and
V
until the required D2
parameter appears. Press ENTER to confirm. D3 and
D4 flash.
4
Press the buttons ^ and
V
until the required D3 and
D4 value appears (see chart). Press ENTER to
confirm.
5
Press ESC to return to the previous display.
D1 D2 Parameter D3 D4
D e f a u l t
option
Options or values
A 0
Flashing light
0 1
x No pre-warning
0 2
With pre-warning
1
Garage light time
0 3
x 3 sec.
0...5. 0...9 59
= 59 sec;
2.5
= 2 min. 50 sec., etc
2
Gate speed
0 1...5 05 01
: minimum speed;
05
: maximum speed
3
Slowdown speed
0 1...3 01 01
: minimum speed;
03
: maximum speed
4
Slowdown distance
0 0...5 01 00
: mi nimum distance;
05
: maximum
distance
5 Recede after closing (to offset
the expansion of the gate) 0 1...9 05 01
: no recede;
09
: maximum recede
6 Maximum thrust 0...1 0...9 05 01
: minimum thrust;
10
: maximum thrust
7 Closing
photocell
used during
standby (in automatic mode
only)
0 1 Immediate close
0 2 x Restart standby time
0 3 Has no effect
8
Pushbutton
operation during
standby (in automatic mode
only)
0 1 Immediate close
0 2 x Restart standby time
0 3 Has no effect
9 Opening mode 0 1 x Opening in accordance with the mode
selected in the main functions (
F
)
0 2
Collective opening
(the control board does not obey the key
commands during opening)
0 3
Step-by-step opening
(the gate halts if a key device is activated
during opening. The gate closes when
operated again)