Erreka Dolfin DOS424E, Руководство по установке

Страница: 60 / 114

Instalacion_153.fm -
30/12/11
INSTALLATION
56
Installation Manual
Anchor the belt
Position the belt anchoring
Tighten the belt
1
Position the belt (1) in its anchoring point (2) as
shown in the figure (the belt should be taut).
1
Position the cover (1) at the end of the guide
2
Insert the anchoring (2) with the belt.
3
Carry out the same operation at the other end of the
guide.
1
Release the operator and place the gate in an
intermediate position.
2
Tighten the belt with the nut (1). Do not tighten the
belt excessively, as this will impede operation.
O
THE BELT MUST ONLY BE TIGHTENED WITH
THE ACTUATOR UNLOCKED.

For a correct finish, cut the piece of belt which
protrudes over the ties (2).
1
P153L
1
2
P153M
1
P153N
2