Erreka Dolfin DOS424E, Руководство по установке

Страница: 64 / 114

Pog
ramacion_
153.fm -
19/4/12
START UP AND PROGRAMMING
60
Installation Manual
3 PROGRAMMING SEQUENCE

Before entering the programming menus, it is
necessary to close the gate or disconnect the device
and then reconnect.

Press the ENTER button to access the programming
menus.
The display shows “
C ” 1 01 or “ C ” 1 0 2 .

Use the keys ^ and
V
to select the required values,
and confirm by pressing ENTER.

Use ESC to go back to the previous display.

To leave the programming menu, press ESC several
times until the display goes off or shows
CL
.
1
Programme the prior conditions (see “Initial
Conditions Programming (D1= “
C
”)” on page 60).
2
Record the pedestrian and total opening radio
codes, along with the gate open/close (see “Radio
code programming (only with RSD) and gate open/
close programming (D1= “
P ”)” on page 61).
3
Programme the functioning mode, automatic
standby time and pedestrian opening (see “Main
Functions Programming (D1= “
F
”)” on page 61).
4
Programme the advanced functions (see “Advanced
Functions Programming (D1= “
A ”)” on page 62).
Initial Conditions Programming (D1= “
C
”)
1
Press ENTER to access the programming menus. The
display lights up and D1 flashes.
2
Press the buttons ^ and
V
until D1 shows the letter
C flashing. Press ENTER to confirm. D2 flashes.
3
Press the buttons ^ and
V
until the required D2
parameter appears. Press ENTER to confirm. D3 and
D4 flash.
4
Press the buttons ^ and
V
until the required D3 and
D4 value appears (see chart). Press ENTER to
confirm.
5
Press ESC to return to the previous display.
Display D1 D2 D3 - D4
off
or
indicating
CL
ENTER
á
Select the value
using ^ and
V
ENTER
á
Select the value
using ^ and
V
ENTER
á
Select the value using
^ and
V
ESC
à
ESC
à
ENTER
(confirming)
à
ESC
(unconfirmed)
à
C 1 0 X
General navigation through the programming parameters and menus
D1 D2 Parameter D3 D4
Option
default
Options
C 1 Motor turning direction 0 1 x
0 2
4 Opening safety device (photocell
or strip) 0 0 x Device not installed
1 0 Device without testing
1 1 Device with testing
5 Closing safety device (photocell
or strip) 0 0 x Device not installed
1 0 Device without testing
1 1 Device with testing