Eridan IP535-07ea-RS, Руководство по эксплуатации

Страница: 5 / 29

5
–
maximum switching voltage 60 V
–
maximum closed key resistance 16 Ohm
–
minimum open key resistance 15 MOhm
–
input/output galvanic separation voltage 1,500 V.
2.10. The call points include a two-colored (green/red) LED indicator of operation modes.
2.11. Maximum overall dimensions of the call point (without cable glands): 120x135x110 mm.
2.12. Maximum weight of the call point (without cable glands): 1.0 kg.
Maximum gross weight of 1 unit in an individual package: 1.3 kg.
Maximum weight of a four-unit packaging: 0.3 kg; eight-unit packaging: 0.6 kg.
2.13.
Reliability indexes:
–
the call point is designed for 24/7 round-o'clock continuous operation
–
minimum mean time between failures in standby mode is 60,000 hours
–
the minimum specified lifetime is 10 years.
The specified ratings can be extended subject to implementation of actions in accordance with
GOST 33272-2015, works as per par. 10.4 hereof and a positive conclusion based on results of the
actions implemented.
In case decision is made of their decommissioning and withdrawal, the call points must be
disposed of by the end user.
2.14. Operating conditions:
– ambient air temperature from minus 60°C to plus 85°C
–
atmospheric pressure from 84 to 106.7 kPa (from 630 to 800 mm Hg)
–
relative air humidity 100% at a maximum temperature of 25°C and 95% without
condensation at a maximum temperature of 40°C.
2.15. Electric shock hazard protection of the call point corresponds to Class III as per GOST
12.2.007.0-75.
2.16. Electric insulation between the connected output conductors and the call point body under
normal climatic conditions withstands a sinusoidal alternating voltage of 0.55 kV, 50 Hz during one
minute.
2.17. Electrical resistance of insulation between the connected output conductors and the call
point body under normal climatic conditions is minimum 20 MOhm.
2.18. The call point is resistant to sinusoidal vibration of 2-150 Hz under acceleration of up to
0.7g.
2.19. The call point remains operational when subjected to direct mechanical impact of 1.9 J.
2.20. The call point is resistant to mechanical impacts under acceleration of 5g and length of
impact pulse of 18±5 msec.
2.21. The call point design guarantees its reliability under seismic impact of 9 on the MSK-64
scale as per GOST 30546.1-98.
2.22. The structural design of the call points guarantees their fire safety as per GOST R 53325-
2012 under normal operation and operation in fault condition.
2.23. The call points comply with the regulations and requirements of electromagnetic
compatibility as per TR CU 020/2011, GOST R 53325-2012, test rigidity degree 2.
Value of radio-noise field intensity generated by the call point during its operation does not
exceed limits established as per GOST R 53325-2012 for Class B equipment.
2.24. Ship service call points are resistant to salt (sea) fog and failure-proof in case of long
heeling of the ship up to 22.5°, max. hull angle 10°, at simultaneous heeling and hull angle as
above, as well as at rolling up to 22.5° every 7-9 sec and at pitching up to 10° from the vertical
axis.
2.25. The input device of the call point is designed to be wired with round cable section, outer
diameter 6-12 mm (along the rubber sealing, i.e. cable wrapping).
Upon customer request, the call points are provided with input devices or plugs can be installed.