PC Configuration
54
1/1551-CRH 102 167 Uen Rev C 2007-04-19
4. Make sure that
Workgroup
is selected in the
Member of
section and
that the name of the workgroup is exactly the same as on the Ericsson
W20/21
Sharing
page. If not, select the
Workgroup
option and type
the name in the field. If there is already a workgroup name, although
not the same as on the Ericsson W20/21, you have to change the
workgroup either on the PC or on the Ericsson W20/21.
5. If you have made any changes, click
OK
. Otherwise, click
Cancel
. The
Identification Changes
window is closed.
6. If you have changed the workgroup settings, follow the instructions on
the screen to restart the PC.
3.3.2
Accessing a Shared USB Mass Storage Device
To access a USB mass storage device from a PC using Windows 2000 or
XP, follow the steps below:
1. In the Windows task bar, click the
Start
button, and then click
Run…
.
2. Type
\\<host name>\<share Name>
in the
Open
field. The
Host
name
and
Share name
are displayed on the Ericsson W20/21
Sharing
page. Click
OK
.
3. The shared resource is displayed. Double-click on the shared file to
open it.
3.3.3
Setting Up a Connection to a Storage Device
The following sections include instructions on how to set up a connection to
a mass storage device from a PC using Windows XP or 2000. The Storage
device will be displayed in the
My Computer
window as a new partition.
Windows XP
Follow the steps below to set up a connection to a shared storage device
from a PC using Windows XP:
1. In the Windows task bar, click the
Start
button, and then click
My
Computer
. The
My Computer
window is displayed.
2. From
the
Tools
menu, select
Map Network Drive…
. The
My
Network Drive
window is displayed.
3. Select a drive that is not already used from the
Drive
drop-down
menu.