Configuration and Management
48
1/1551-CRH 102 167 Uen Rev C 2007-04-19
Each row in the log list displays the time and date when an alarm occurred,
the type of alarm, and a brief statement indicating its cause.
If persistent logging is enabled, the logs will remain after a system restart.
To enable this feature, select the
Persistent logging
check box on the
Event Log
page and click
Apply
.
To view only a selection of the logs in the list, select a filter level from the
Display
list. Available log levels are
Alarm
and
All
. The
Alarm
log level
corresponds with the
Alarm
indicator on the Ericsson W20/21 unit and the
information in the
Alarms
section on the
Overview
page.
Click
Refresh
to update the list with new information. The most recent logs
are listed at the bottom of the list.
Note:
If the actual time is not available, the timestamp is set to “Jan 1
00:00:00” when the Ericsson W20/21 is restarted. This will change
to actual time when available.
