Configuration and Management
1/1551-CRH 102 167 Uen Rev C 2007-04-19
31
IP address range
from
The first IP address in a range of IP addresses
that can be assigned to the LAN clients.
IP address range to
The last IP address in a range of IP addresses
that can be assigned to the LAN clients.
Lease Time [sec]
The IP address lease time; a value between
60
and
2147483647
seconds.
To disable the DHCP server, clear the
Enable DHCP server
check box.
Note:
If you want to configure your connected devices with static
addresses, make sure that the addresses are outside the DHCP
server IP address range.
To change the range of available addresses, change the IP addresses in
the
IP address range from
and
IP address range to
fields.
Note:
- The DHCP server IP address range has to be on the same subnet
as the Ericsson W20/21 LAN IP address.
- The IP address range must not include the Ericsson W20/21 IP
address.
- If port forwarding is configured, those settings have to be
removed before changing the DHCP server IP address range. For
information, see section
2.7.3 – “Port Forwarding”.
In the
Lease time [sec]
field, enter the time (in seconds) you want the LAN
device to lease the IP address before it is reassigned.
Click
Apply
to save the settings.
2.5.2 Traffic
Statistics
The following information is displayed in the
Traffic Statistics
section on
the
LAN
page:
Transmitted
The total size (and number) of transmitted data
packets on the LAN.
Received
The total size (and number) of received data packets
on the LAN.
Note:
The data size and packet counters have the upper limits of 4 GiB
and 2
32
packets (more than 4 billion packets). When these limits
have been reached, the counters wrap around to zero.
