R290 User’s Guide
56
Scroll to the message you wish to delete using the
SOFT
keys and press
long
CLR
. ‘Delete Message?’ is displayed. Press
YES
to delete this
message and your phone will return to the store. If you delete the last
message, your phone will display ‘No Messages’ before returning to the
Message Menu display.
If you wish to delete a message while you are reading it, press long
CLR
from within the message. ‘Delete Message?’ is displayed. Press
YES
to
delete this message and your phone will jump to the top of the next
message.
Press
NO
to exit either of the two delete operations without clearing the
message.
To Select Message Tones
The message alerting tone can be set to occur once only or to repeat once
every minute until the message is read, the key is pressed, or the phone is
switched off.
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press
3
to display the Tones menu.
3. Press
1
,
2
or
3
to set the message announcement tones to single play,
repeating (once a minute) or to disabled. A confirmation message is
displayed before your phone returns to the stand-by display.
In a call, the tones are produced once only to avoid disrupting the call.
Press
NO
to exit without changing the current setting.
NOTE:
When the message alerter tones are suppressed, the tones heard through
the earpiece during a call will not be affected.
Clearing Messages Automatically
The memory space allocated for messages is limited, and you may not
wish to spend time periodically deleting old messages. You can set
automatic message clearing to delete old messages that you have already
read to make room for new ones.
NOTE:
The messages you have read will only be deleted when the message store
is full and a new message is received. Unread messages will never be
deleted, the display will show Store Full when there are only unread
messages in the memory store.
1. Press
SOFT LEFT
,
3
to enter Messages menu.
2. Press 4, to display the Auto Clear Menu. The display will show:
3. Press
1
to enable or
2
to disable automatic message clearing. A
confirmation message is displayed and your phone returns to the
stand-by display.
Press
NO
to exit without changing the current setting.
