Ericsson SATELLITE R290 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 74

background image

R290 User’s Guide

iv

• The battery can only be charged when the temperature is between 41

degrees F (+5 degrees C) and + 113 degrees F (+ 45 degrees C).

• Turn off your phone before removing the battery.
• Do not attempt to take a battery apart.
• Do not let the metal contacts on the battery touch another metal object.

This could short-circuit and damage the battery.

• Do not expose a battery to open flames. This could cause the battery to

explode.

• Do not expose a battery to liquid.
• Do not use the battery pack if it shows signs of rust, overheating,

leakage or changes in colour or shape.

• Do not puncture the battery pack or expose it to strong shock.
• Do only use the battery for the intended purpose.
• Do not allow the battery to be placed into the mouth. Battery

electrolytes may be toxic if swallowed.

Recycling Your Battery

Your phone manufacturer is a member of the Rechargeable Battery
Recycling Corporation (RBRC), a non-profit public service organization
designed to assist in the recycling of rechargeable batteries. Many areas
require recycling of rechargeable batteries. In the U.S., call 1-800-822-
8837 to find out how to recycle your battery. Outside the U.S., contact
your local retailer for recycling instructions.

Please note!

Some of the services mentioned in this manual are not supported by all
networks or by all service agreements. This also applies to the
International Emergency Number 112.

Please contact your network operator or service provider if you are in
doubt whether you can use a particular service or not.

The

symbol on our products signifies that they have been certified

according to the EMC directive 89/ 336/ EEC, the Telecommunications
directive 91/ 263/ EEC, and the Low Voltage directive 73/ 23/ EEC when
applicable. The products fulfil the requirements according to the
following standards:

Cellular Phones and Accessories in Combination:

• ETS 300 342- 1 EMC for European digital cellular

telecommunications.

Accessories Without Direct Connection to a Cellular Phone:

• EN 50081 Electromagnetic compatibility, Generic Emission Standard,

and EN 50082 Electromagnetic compatibility, Generic Immunity
Standard.

«
...
4
5
6
7
8
...
»

Содержание SATELLITE R290











































































Отзывы:

Нет отзывов

Похожие инструкции для SATELLITE R290

SoundStation 7000

Бренд: Polycom Страницы: 38

Бренд: H-TEK Страницы: 142

Бренд: Sony Ericsson Страницы: 74

Бренд: Sony Ericsson Страницы: 19

Бренд: Alcatel Страницы: 73

Бренд: Polycom Страницы: 9

Бренд: Samsung Страницы: 41

Бренд: Samsung Страницы: 85

Бренд: Samsung Страницы: 97

Бренд: Samsung Страницы: 65

Бренд: Samsung Страницы: 39

Бренд: Samsung Страницы: 86

Бренд: Samsung Страницы: 116

Бренд: Samsung Страницы: 68

GT-S9110 User Manual(1.0)

Бренд: Samsung Страницы: 60

Бренд: Samsung Страницы: 106

Бренд: Samsung Страницы: 133

Бренд: Samsung Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды