Ericsson HM4x0, Справочное руководство

Страница: 540 / 702

Security CLI Commands
540
2/1553-ZAT 759 94 Uen B – December 2005
−
set security levels and policies that determine whether traffic between
interfaces is allowed or blocked.
−
set portfilters to determine which ports and protocols are allowed or
blocked.
For information on NAT commands, see chapter 14 - NAT CLI Commands.
For information on stateful Firewall commands, see chapter 10 - Firewall CLI
Commands.
The table below lists the Security commands provided by the CLI:
security enable|disable security status
security enable|disable
blockinglog|intrusionlog|
sessionlog security set blockinglog|intrusionlog|
sessionlog level
security add interface security clear interfaces
security delete interface security list interfaces
security show interface security add management-station
range
security delete management-
station security list management-station
security set management-station security add trigger tcp|udp
security add trigger netmeeting security clear triggers
security delete trigger security list triggers
security set trigger
addressreplacement security set trigger multihost
security set trigger
binaryaddressreplacement security set trigger maxactinterval
security set trigger endport security set trigger startport
security set trigger
secondaryendport security set trigger secondarystartport
security set trigger
sessionchaining security set trigger
UDPsessionchaining
security show trigger security enable|disable IDS
security set IDS blacklist security set IDS DOSattackblock