manualshive.com logo in svg

Ericsson Base Station F800, Руководство по обслуживанию на месте

Поделиться
Скачать
Ericsson Base Station F800 Скачать руководство пользователя страница 9

 

 

 

 

 
SAFETY PRECAUTIONS 

 
2 (4) 

Uppgjord (även faktaansvarig om annan) - 

Prepared (also subject responsible if other)

 

Nr - 

No.

 

 

 

KL/ECS/S/LT Magnus Lindahl 

ECS/S/LT-96:5031 

 

Dokansv/Godk - 

Doc respons/Approved

 

Kontr - 

Checked

 

Datum - 

Date

 

Rev 

File 

KI/ECS/S/LTC (Ulf Brömster) 

 

1996-06-03 

A 

 

 

965031.doc

 

 

COMPONENTS 

 

Power transistors, diodes and thyristors 

Power transistors, diodes and thyristors, as received in the manufacturers packing, are 
clearly identified by attached information. They should be stored in the original packing 
and not mixed with other items. The Beryllia is encapsulated and components are safe 
to handle for replacement purposes. Care should be exercised in removing defective 
items to ensure that they do not become physically damaged. 

They MUST NOT: 

  be carried loosely in a pocket, bag or container with other components where they 

may rub together or break and disintegrate into dust 

  be heated excessively (normal soldering is quite safe) 

  be broken open for inspection or in any way abrased by tools. 

Heat sink washers 

Some of the heat sink washers contain Beryllia. When new these are packed 
individually. 

They MUST NOT

:

 

  be stored loosely 

  be filed, drilled or any way tooled 

  heated other than when clamped in heat sink application. 

They are best handled with gloves or cloth when being removed from equipment. 

Cathode ray tubes and ceramic applications 

Some products of cathode ray tube are coated on the inside with a ceramic beryllium 
oxide mixture. The tube is safe unless the glass is broken but should this occur. 

DO NOT: 

  handle the broken glass with bare fingers 

  blow on the exposed surface (because of the danger of inhalation). 

Ceramic cylinders or formers, identified by blue coloration or black lines, are safe to 
handle provided they are not damaged. In the latter event take precautions as with 
other components. 

 

Содержание Base Station F800





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды