manualshive.com logo in svg

Ericsson Base Station F800, Руководство по обслуживанию на месте

Поделиться
Скачать
Ericsson Base Station F800 Скачать руководство пользователя страница 27

 

 

 

 

 
INSTALLATION 

 
6 (6) 

Uppgjord (även faktaansvarig om annan) - 

Prepared (also subject responsible if other)

 

Nr - 

No.

 

 

 

KL/ECS/S/LT Magnus Lindahl 

ECS/S/LT-96:5036 

 

Dokansv/Godk - 

Doc respons/Approved

 

Kontr - 

Checked

 

Datum - 

Date

 

Rev 

File 

KI/ECS/S/LTC 

 

1996-06-04         A 

 

 

Error! Unknown switch argument.

 

INSTALLATION DOCUMENTATION 

 

On completion of installation, the technician should prepare installation 
documentation which should include specific instructions and documents to facilitate 
servicing of the installation. The installation documentation should be available at the 
installation site and at the local workshop. 

The installation documentation may include, for example: 

  How access is obtained to the site (keys, etc.) 

  General information on the power supply (location of fuses and switches) 

  Information on control and maintenance of the air-conditioning equipment, if 

provided, etc. 

 

Further, copies of the forms in chapter 5, Commissioning, must be filled in and 
included with the documentation. 
 
 
 
 
 
 
 
 
 
 
 

Содержание Base Station F800





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды