Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
20/25
7
Safety strip - Squeezing protection
With lifting systems of Ergoswiss AG it is important to make sure that no objects or people are trapped dur-
ing the lifting movement. ->
Danger of squeezing
Attach the safety strip to an assumed squeeze zone. If the safety strip gets squeezed while the system
moves, the motor will stop instantly and turn back for one motor turn.
Depending on the combination of systems (hydraulic transmission ratio), the system stops its movement
3mm, 5mm or 10.5mm before the defined end position.
The safety strip compact (124.00105) consists of:
7.1
Technical Data
Functional properties of the contact tube
Contact angle
< 80 °
Switching pressure
< 25 N at 23 °C
Switching travel
< 2mm at 23 °C
Bending radii minimal
B
1
120 mm / B
2
150 mm /
B
3
20 mm / B
4
20 mm
Max. tensile load
20 N
Electrical properties
Terminal resistance
2.2 kOhm
Max. switching capacity
250 mW
Max. Voltage
DC 24 V
Current min/max
1 mA / 10 mA
Adapter cable sadety strip comp.
124.00106
End piece with cable / RJ45
124.00107
Contact tube
124.00101
End piece with
resistor 2.2k
Ω
124.00118
185 mm
2’500 mm
variable
10 mm
