Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
7/25
2.2
Basic safety instructions
The safety instructions must be paid attention to. If the system is operated improperly, it can cause danger
to people and objects!
It is essential to read this operating instruction thoroughly before commissioning the system. This operating
instruction has to be stored in the immediate vicinity of the system.
→
In no case the control box may be opened! There is the risk of an electrical shock.
→
Modifications or changes to the control box, the manual control switch, the motor and any connection
cables are forbidden!
→
The control box must only be operated with mains voltage indicated on the name plate!
→
The supplied power cable must be used. It is forbidden to operate the control box with a damaged
power cable!
→
Electrical cables must not be exposed to crushing hazard or to bending and tensile loads.
→
Before connecting/disconnecting the manual control switch the power cable has to be disconnected
from the mains!
→
The control box must not be operated in a potentially explosive atmosphere!
→
The control box must be protected from moisture, dripping water as well as spray water!
→
The control box is not suitable for continuous use. The operation/hold ratio must not exceed 2/18.
→
If there is a failure (for example, if the control drives on its own, or if a push button is stuck) the power
cable is to be separated from the mains immediately! The power cable must be freely accessible at any
time.
→
While using the height adjustment of the work surface there is a danger of squeezing. It is important to
make sure that no objects or people are within the danger zone and no one is reaching into the danger
zone.
→
This device is not intended to be used by people (including children under 8) with restricted physical,
sensory or mental abilities or with a lack of experience and/or knowledge, unless they are supervised by
a person responsible for safety or they have received instructions by this very person on how to operate
the device.
→
Children under 8 should be supervised to ensure that they do not play with the device.
→
If the power cable of the drive is damaged it must be replaced by the manufacturer, the manufacturer's
customer service or by a similar qualified person.
→
Only use a dry or a damp cloth to clean the control box! Before cleaning, the power cable has to be
separated from the mains!
