Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
10/25
Motor socket 1 (M1)
Motor socket 2 (M2)
(S)
Socket for manual control switch
(D) Connection for safety strip or sync cable
(P)
Power socket
(F)
Connection for functional grounding (e.g. ESD)
ATTENTION
Connecting homemade products to the control box is prohibited!
Only use supplied components.
1.
Connect the motor cable to the control box. The continuous cable must be plugged into the motor
socket
M1
, the split cable must be plugged into the motor socket
M2
.
2.
Connect the manual control switch to the control box.
3.
Connect the power cable to the control box.
4.
Connect the power cable to the mains. (Clicking sound
→
ready for initial operation)
NOTE
The drive does not work, if the motor cable plugs (
M1 + M2
) are connected to the wrong
socket.
1
2
S
D
P
F
Connect optional
components
M2
M1
