Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
11/25
NOTE
Before connecting the power cable to the mains the following must be verified:
→
Does the mains voltage correspond to the value on the name plate of the control box?
→
Are the plugs of the motor cable connected to the correct sockets (M1, M2)?
→
Is the entire lifting system assembled according to the assembly instructions?
NOTE
The motor cable, connecting the control box to the motor, has a length of 950 mm. If need-
ed, up to 5 motor extension cables can be connected. They have a length of 1’200 mm.
→
124.00137: PXD compact E
xtension cable 1’200 mm
Motor
NOTE
The cable of the manual control switch has a length of 1’
800 mm. If needed it can be ex-
panded with up to 3 extension cables. They have a length of 1’000 mm.
→
124.00071: PXD Extension cable
1’000 mm
Manual control switch
