Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 16 / 20

16
Operators Manual ES-648E
AKKUVEC
Troubleshooting
If the suction power is insufficient:
• Collection bag full?
• Collection bag dirty or clogged?
Clean or wash the bag regularly.
• Suction nozzle or suction hose blocked?
•
Switch off the engine and wait for the engine to stop.
Only then remove the suction nozzle and remove the
material. Wear protective gloves.
• Blower blocked, turbine blocked.
Switch off the engine and wait for the engine to stop.
Only then remove the suction nozzle and remove the
material. Wear protective gloves.
Warning:
Waste that has clogged the unit may contain
sharp-edged glass or ceramic fragments and
metal parts. There may be sharp edges in
the unit.
Always wear protective gloves when working
on the turbine and removing blockages.
Risk of injury due to sharp edges.
DANGER:
Before carrying out any work on the unit, re-
move the ignition interruption switch to position
„AUS“.
Risk of serious injuries.
Heavy-duty zipper:
• Zipper stiff?
Clean the zipper with a strong brush and soap suds,
dry and treat with talcum.
Maintain the zipper regularly with talcum.
If the engine doesn’t start:
1. Check the display, is there an error message?
2. Is the upper locking screw on the suction nozzle
completely screwed in?
3. Is the 20 A fuse (control circuit fuse) OK?
4. In case of damage to the main fuse, the device must
be immediately handed over to a specialist dealer
for inspection! Fire hazard!