Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 9 / 20

9
Operators Manual ES-648E
AKKUVEC
Turning the potentiometer increases the motor speed continuously
from 0 to 2,800 rpm.
Always adjust the motor speed to the conditions, constant full
speed reduces the operating time of the device!
Use the BOOST push-button!
If the speed is set to 0 rpm, the operating hours can be read off.
If there is an error in the system, the display shows a
“Fle.”
Charger socket
The ES-648E can easily be charged via the ERCO Z-7501-E48-20
charger.
To do this, place the unit in a dry, level place and secure it by
applying the handbrake.
Connect the charger and the ES-424E to the battery charging
cable. The charger switches off automatically when the battery
is fully charged.
Charging the battery more frequently
increases battery life.
Avoid charging interruptions!
See also page 12
The speed of the motor can be infinitely adjusted on the poten -
tiometer
j
.
The BOOST push-button can be used to briefly increase the speed
to 2.800 rpm, regardless of the speed preset on the potentiometer
k
.
The ES-648E is switched on (EIN) / off (AUS) at the ignition
switch
l
.
j k l