Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 14 / 20

14
Operators Manual ES-648E
AKKUVEC
Installing the suction hose (Accessory)
• Make sure that the engine is switched off. Move the
suction trunk to the highest position. Remove the suc-
tion trunk from the unit by removing the two wing nuts
and the butterfly screw on the safety switch.
• Attach the mounting flange of the suction trunk to the
turbine casing accordingly. Slide the suction hose onto
the mounting flange and tighten the hose clamp.
• Always switch off the engine to change between the
suction hose and the suction trunk.
DANGER:
Never locate or bridge the safety switch on the
turbine housing.
Replace defective switch before putting it into
operation again. Never start or run the engine
without the suction trunk or suction hose.
Risk of serious injuries.
Clothes and limbs could be sucked in.
Suction Hose
Fastening Collar
Wing Nuts
Butterfly Screw
Suction Hose
mounted