Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 8 / 20

8
Operators Manual ES-648E
AKKUVEC
Control Panel
The following operating and display instruments are located in
the control panel:
1. Multi-function
display with
- Speed display
- Battery capacity
- Maintenance intervals
- Error display
- Deep discharge monitoring
2. Speed potentiometer
- Continuously variable speed regulation of the
electric motor.
3. BOOST-push button
- Accelerates the low preselected engine speed to full
speed for a short time.
4. Key switch
Turns the unit on (EIN) and off (AUS).
Multifunction Display
This display is directly connected to the motor controller and
indicates current operating situations and possible errors.
The two lower buttons are not assigned in this configu-
ration, and no changes can be made with them either!
The control lamp
j
lights up yellow during trouble-free operation.
If a fault occurs, it lights RED.
A red light up during starting does not represent a fault but is part
of the “self-test”.
j
When the ES-648E is switched on, the ERCO logo appears in
the display.
The battery capacity is indicated in the upper area with bars, and
in the lower area in percent.
Attention!
This capacity display only determines the exact state of charge of
the battery after some time, especially after replacing the battery,
this display only adjusts after approx. 20-30 Min!
At the end of the battery capacity (10%) the electronics switches
to a safety mode, whereby the device only reaches a speed of
approx. 800 rpm!
Connect the device to a charger as quickly as possible!
These control keys are not assigned
a
b
c
d
Operating Controls
Familiarize yourself with the operating elements of your leaf and waste suction machine.