Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 13 / 20

13
Operators Manual ES-648E
AKKUVEC
Warning:
Do not suck glass or ceramic wast, such
as bottles and shards.
Bottles, like other waste, are broken in the tur-
bine. Sharpedged shard could break through
the bag.
Risk of injury from splinters thrown out
or from handling the waste.
Correct operation
In order to ensure a good suction performance, the fol-
lowing points must be fulfilled:
• sufficient engine power
• a powerful turbine
• adapted driving speed
• the correct height adjustment of the suction trunk
1. Your leaf and waste vacuum cleaner is equipped with a
very powerful Electrical motor. Powerful 1,5 kW ensure
that there is always enough engine power available.
2. The proven design of the turbine ensures excellent
suction power. However, only a well-balanced and
undamaged turbine can deliver a decent performance.
3. The adjustment of the forward speed is controlled by
a single-stage gearbox. This allows you to adjust the
travel speed in any situation so that you can achieve
the desired suction power. The differential gear allows
unlimited manoeuvrability.
4. The infinitely variable height adjustment of the suction
nozzle by means of the turning spindle determines
the suction power. The suction nozzle should only be
set so deep that a proper suction power is achieved.
Adjustment too low impedes manoeuvrability and
causes damage to the suction trunk, which does not
improve the suction performance. If the setting is too
high, there is a lack of suction power and the suction
power is unsatisfactory.
Dry leaf suction
Dry leaf is crushed by the turbine during suction. Adjust
the suction trunk only as close to the ground as is abso-
lutely necessary to ensure that the implement remains
manoeuvrable. Keep in mind that when used in dry terrain,
both the machine and the bag will hardly get dirty. This is
different with damp leaf. After suctioning off larger areas,
the bag must be washed.
Suction of wet leaves
Basically we recommend the wet collection bag. Due to
the larger pores, it remains permeable to air even after
prolonged work.
In wet leaf, the suction trunk must be guided as close to
the ground as possible. In order to achieve good suction
power, the driving speed should be adjusted (slows down)
accordingly.
Suction Trunk
Butterfly
Screw
Fastening
Collar
Wing Nuts
In case of contamination/clogging
To do this, remove the two outer wing nuts and unscrew
the butterfly screw in the middle, on the safety switch,
completely. Now remove the fastening collar for the suc-
tion trunk and the suction trunk.
Loosen the dirt / blockage with a wooden stick or simi-
lar. Do not reach into the turbine housing with your bare
hands, always use gloves.
Once all coarse dirt has been removed and the turbine
can be turned freely again, reinstall the suction trunk and
let the unit run. It is now ready for use again.
Pay Attention:
Regular inspection and cleaning of the turbine housing
maintains the high suction power of the machine.