Erco AKKUVAC ES-648E, Оригинальное руководство оператора

Страница: 10 / 20

10
Operators Manual ES-648E
AKKUVEC
Attention:
Never block the clutch lever in any way.
Clutch lever
The clutch lever is for engaging the travel drive. Press
this lever against the guide rail to start moving. When you
release the lever, the drive is disengaged.
The machine does not brake automatically!
Important notice:
The driving speed must not be controlled
via the clutch lever. If the clutch lever is not
pushed through to the spar, the drive V-belt
grinds and thus wears very quickly.
Clutch lever
Handbrake
Your ES-648E leaf and waste vacuum cleaner has a hand
brake on the left side of the handlebar. When you switch
off the unit or briefly leave the operator position, apply the
handbrake. The machine cannot roll away. Before you
continue working, release the handbrake.
Adjusting spindle for suction trunk
Adjusting Spindle for Suction Trunk
The adjustment spindle for the infinitely variable height
adjustment of the suction trunk is located on the left
side of the unit.
Turn the spindle counter-clockwise to lower the suction
trunk. A suction trunk height of 7.5 cm is generally con-
sidered ideal for dry suction material. Place the suction
trunk lower in the appropriate position with wet or even
wet and rotten material. The lowest setting is reached
when the rubber apron reaches the floor. It is not advis -
able to make a lower setting, as it does not improve the
suction power and can damage the suction trunk.
Too high setting reduces suction power.
Important:
Adjust the suction trunk as high as possible. A too
low setting can cause damage to the suction trunk
and does not improve suction performance.