Erbe ICC 200, Руководство по обслуживанию

Страница: 117 / 266

1 TEST PROGRAMS AND ADJUSTMENTS 117
/ 266
Art. No.: 801
16-201
0
9
/ 200
4
Adjustment of activation
and instrument detection
MIC board 30128-200
Setting the instrument detection
• The setting takes place in program 12 MIC.
• Connect a resistor of 51 R, ± 1% and 0.2W to the test line.
ATTENTION!
The original ERBE TEM connecting cable EE 20192-086 has a cable impedance of 1 Ohm per cable, which
produces a series resistance of 2 Ohms for the instrument detection. In the line to and from the unit the
instrument test line must have a series resistance of < 0.5 Ohm. Since on the V4.00 version only the TEM
instrument no. 1 and MIEN probe no. 1 are connected up, it is sufficient to perform the balance only for
these instruments.
With jumper JP4 on the front panel the measurement display is activated.
Measurement display
AUTO CUT AUTO COAG 1
I measurement I no.
I-measurement Measurement of instrument detection 0…255
I-No. Instrument number
Using trimming potentiometer TP 1, set I measurement to 52 (resistance of 51 R ± 1%; 0.2 W).
Testing the instrument detection
Detection resistance Instrument no. Valid range
0 R 0
0…2
10 R 1
3…20
30 R 2
21…45
51 R 3
set value 52
62 R 4
70…91