Erbe ICC 200, Руководство по обслуживанию

Страница: 29 / 266

1 TEST PROGRAMS AND ADJUSTMENTS 29
/ 266
Art. No.: 801
16-201
0
9
/ 200
4
Display programs nos. 1–3
The selected display program now displays the required data during regular operation of the unit. To do
this, the appropriate operating modes must be set and the accessories activated.
The display program remains activated until the power is switched off. To return to normal operation, the
unit must be switched off for a short time and switched back on again.
Display program no. 1: not assigned
Display program no. 2: not assigned
Display program no. 3:
ST generator time control with activation of SPRAY or FORCED.
Display for ICC 350 and ICC 300:
AUTO CUT AUTO COAG 1 AUTO COAG 2 AUTO BIPOLAR
ttt P 2 P 3 tst
ttt Difference between set frequency and actual frequency
P 2 Set power [W]
P 3 Set power [W]
tst Abbreviation of the test title (Time-ST stage)
Display program no. 3:
ST generator time control with activation of FORCED.
Display on ICC 200:
AUTO CUT AUTO COAG
ttt tst
ttt Difference between set frequency and actual frequency
tst Abbreviation of the test title (Time-ST stage)