Erbe ICC 200, Руководство по обслуживанию

Страница: 132 / 266

2 ERROR LIST 132
/ 266
ERROR no. 23–33
Error
no. Designation and remedies
23
Switch on the power, AUTO COAG 1 is switched on.
Activate unit only after switching on power. Check fingerswitch and footswitch as to whether
key or pedal is stuck or switch is defective.
Otherwise equipment defect: Technical Service.
24
When switching on the power, AUTO COAG 2 is switched on.
Activate unit only after switching on power. Check fingerswitch and footswitch as to whether
key or pedal is stuck or switch is defective.
Otherwise equipment defect: Technical Service.
25
When switching on the power, AUTO BIPOLAR is switched on by footswitch.
Activate unit only after switching on power. Check footswitch as to whether key or pedal is
stuck or switch is defective.
Otherwise equipment defect: Technical Service.
26
Contact is detected when switching on the power. Contact monitor is active.
Check the forceps connecting cable or check forceps for a short circuit. The forceps tips are
touching or lying on a conductive base: Isolate forceps.
Otherwise equipment defect: Technical Service.
27
Overheating! Internal unit temperature > 100°C. Permissible output power is reduced.
Unit generated max. power for a longer period of time.
Allow unit to cool down.
Coagulation electrode too large?
Short circuit or error in accessories?
28
Activation signal for the blue footswitch button already on.
Is the blue footswitch button depressed? Is the button or switch stuck? If necessary, briefly
unplug the footswitch as a test.
First preselect footswitch on the front panel and then switch on.
29
For Spanish version:
During activation, a further activation signal is detected.
Double activation not permissible.
30
Mismatch! Over a time period > 5 sec , the load resistance is < 50 ohms.
Check accessories for short circuit.
31
Mismatch! The output power is > 100 watts. During activation, the load resistance remains
constant and < 300 ohms. After a prescribed time, ERROR 31 appears.
Check accessories for short circuit.
32
Multiple activation detected.
No simultaneous activation via several sources.
If unsuccessful, unit is then defective. Technical Service.
33
At the end of activation, a new activation signal immediately appears.
No simultaneous activation via several sources.