Page.
45/55
recommended)
Unsuitable settings
of the parameters
A functionality test is needed
and/or setup of parameters – it is
done by service specialist. After the
problem is fixed, restart the stove.
chimney
is
smoking
Insufficient air for
burning
The channel for fresh air needs to
be checked. Make sure that there is
enough fresh air in the room
8.
Unburned
fuel
in the ash tray
Inefficient burning
of pellets
A functionality test is needed
and/or setup of parameters – it is
done by service specialist. After the
problem is fixed, restart the stove
9.
High
temperature of
the smoke gases
Clogged and/or dirty
heat
exchanging
surfaces
Cleaning of the heat exchanging
surfaces is required.
Clogged and/or dirty
smoke fan
Cleaning or changing of the smoke
fan is required.
10.
Appearance of
smoke in the
heated
room
after a period of
exploitation.
Clogged and/or dirty
chimney
(smoke
tract)
Clean the chimney. Check the
presostad for functionality– it is
done by service specialist.
The module of the
remote
control
needs
to
point
trough the infrared
port
Point the remote control trough the
infrared port of the interface control
board
11.
The
remote
control is not
functioning
The batteries are
exhausted.
Change the batteries
12.
Other
failures,
not
described
above
It is necessary to consult authorized
technician and eventually service
maintenance should be performed
Table 5.7. Description of operation faults of the hot air pellet stove „ERATO
Pony PS9”, causes and methods for repairing.
ATTENTION: In case of failure the stove needs to be stopped and cooled to
room temperature. After that the failure needs to be fixed. The reason for the
failure needs to be determent and prevented. Then the stove can de restarted and
put in service.
